The Z-300: The Entire Periodic Table of Elements…in Seconds
- Corporate, Research or Government Laboratory
- Academic Lab and Field Research, and a Teaching Tool.
Materials Science — Chemistry — Geological and Ocean Sciences – Physics – Archeology
Meet the Z: The world’s premier handheld LIBS (Laser induced breakdown spectroscopy) analyzer featuring the most advanced technology ever created in a handheld elemental analyzer. The Z-300’s spectrometer range covers 190 nm – 850 nm, or optionally out to 930 nm. It offers instant analysis of every element in the Periodic Table, for nearly all materials, anywhere on the planet. The analyzer features pre-configured Apps for specific applications (alloys, geochem, etc.). Or users may create their own custom analysis models, element lists, and calibrations. The Z includes a full-featured desktop or tablet software package with spectral pre-processing, chemo-metrics, emission line identification for any element and quantitative calibration setup. The Z handheld LIBZ is perfect for the lab, the classroom and the field.
Analyze Many Elements Never Before Tested with a Portable Instrument:
- Low atomic number elements: H, Li, Be, B, C, N, O, Na, Si, P and S*.
- Halogens: F, Cl, Br
- Light metals and elements: Mg, Al, Si, P, S, K, Ca and more.
- Transition, heavy and rare earth elements (REE’s).
*S is available for custom spectrometer extended to 930 nm.
- Incoming laboratory samples – Quickly pre-screen to get qualitative or quantitative list of elements present, and approximate concentration ranges, prior to digestion.
- A great tool for field studies, for instant analysis of any elements present in geochem, archeology and/or forensics samples, others.
- Rapid elemental pre-screen of materials prior to laboratory analysis.
- Perform the all the types of analysis of typical benchtop LIBS instrument but with a lightweight, handheld device that utilizes an easy to use and intuitive software package”
High resolution Spectrometer
The Z features our proprietary wide range, high resolution spectrometer stack design.
Both standard and extended range versions are available:
Standard range (Z-200 platform)
- 190 nm – 625 nm
Extended range (Z-500 platform)
- 190 nm – 850 nm (Adds elements H, N, O, F, Cl, Br, Rb, Ce, improved K)
- 190 nm – 930 nm (required to measure sulfur)
Shown at right are the main Mg lines easily resolved at 179.6 nm and 280.3 nm, respectively.
PULSAR Laser Technology
Opti-Purge™ Argon Purge Technology
The Z is the only handheld LIBS that offers both argon and air-based operation It is well established that operating in an argon gas atmosphere increases the LIBS signal by 5x-10x or more, depending upon wavelength. Users can optionally operate the Z with it’s on-board argon supply enabled. If you don’t need the precision or sensitivity, simply turn it off. The cost of the argon is approximately 1₵ per test.
The Z has a replaceable argon cartridge inside the handle, with on-board regulator. Simply unscrew the used cartridge and replace. Helium gas also available for enhanced halogen analysis.
As shown spectrally, in an argon environment rather than air, signals are many times larger, thus yielding superior analytical performance.
Sophisticated Laser Rastering
and Sample Cleaning
The Z combines an XY user-controllable laser raster along with integrated high-resolution camera. For heterogeneous samples, users may setup and view the raster pattern, to analyze only specific zones within a sample.
For homogeneous (bulk) samples, the best LIBS results are obtained when the laser beam is moved to multiple locations on the sample, and averages the results over multiple locations. The Z was designed with a computer controlled XY stage to move the laser beam in two dimensions and automatically rasters and averages data.
What is cleaning? The Z may be configured to fire multiple laser shots at the same location, thus burning off surface contamination including dirt, oils, corrosion, etc., prior to data-taking shots. Subsequent laser shots at the same location are used for elemental analysis. The Z is totally user-settable for one or more cleaning shots, followed by repeat data shots, and XY rastering to a new location on the sample. For many samples, cleaning shots are critical to obtaining repeatable, precise analysis.
For a rock sample, for example, the user can view the sample from the integrated camera, and customize the raster pattern to perform LIBS analysis over a specific region.
The Z may be operated in either a gated or ungated mode. For the most quantitative analysis, gating is the recommended operation because it largely eliminates the Brehmstrahlung background produced by the early stages of the plasma. By reducing the background, the signal—to—noise (SNR) is enhanced, yielding both better limits of detection and higher precision.
For some operations, operators only care about maximizing total intensities. In these cases, the Z may be operated (and calibrated) in ungated mode. For some Apps, calibrations are provided for both gated and ungated operation. Please inquire with SciAps.
Shown are a gated and ungated spectrum from the same material. Note that the gated spectrum exhibits far lower background, thus improving the SNR and allowing for lower limits of detection. The ungated signal is substantially higher (as is the background). Ungated operation is best used for higher concentration analysis where speed rather than precision is desired.
An Android, App-Based
The Z runs on the Android operating system. Various calibrations are easily added as independent Apps, much like a Smartphone. Have a custom application? Use the SciAps Empirical App, and the included ProfileBuilder desktop software, to create your own calibrations and testing methods for any element, in virtually any material. In the near future we’ll be offering additional Apps via our web-site, and the ability for users to create and share their own testing methods via their own Apps.
Check out our Element Pro App
Element Pro includes an on-board library of LIBS emission lines for every stable element in the periodic table. Simply shoot a sample, and get a list of elements present, based on the Z’s peak finding algorithm. Element Pro also provides a qualitative estimate of relative abundance based on measured line strengths in a variety of materials. Tap on an element to get a zoomed spectral view identifying the lines present. Element Pro is an ideal App for quickly testing materials to discover elements present, without the need for quantitative calibrations.
Calibration and Method Software
Want to quantify results?
ProfileBuilder delivers all the tools you need.
The Z is more than just a handheld spectrometer. It also offers full calibration and method development software. Run it on a PC, a laptop or a tablet. Locate elemental lines after testing samples, calculate intensities and intensity ratios, perform spectral overlays, baseline subtractions and smoothing.
Also generate calibration methods using reference samples with known assays. The Z offers on-board or on the Tablet/PC capability for polynomial calibration fits.
Report Generation and
Google-Powered! The Z is built on the Android Platform to defy obsolescence and provide easy report generation and data management. Tap the SHARE icon and instantly print a test report. Or send it to your cell phone via the on-board wireless and email the data anywhere in the world. The Z is Wireless, Bluetooth and GPS enabled, and Android delivers easy connectivity to any device – phone, tablet, PC, server.
Handheld Raman Analysis:
In the lab or in the field – the Inspector Series Raman is a great tool for teaching or field studies. Raman spectroscopy is a highly selective method for uniquely identifying a wide range of organic compounds and minerals. The Inspector series can be used with SciAps’ own libraries, external chemical libraries, or users may generate their own.
Portability when you need it, or dock it to the SCOPE for small particle analysis, with integrated microscope and video.
Novel 1030 nm technology that suppresses fluorescence, and thus expanding the range of compounds you can analyze.
Advanced chemo-metrics package available to support advanced spectral analysis and quantification.